高伟，男，副教授，工学博士，硕士研究生导师。近年来，主持国家自然科学基金面上项目、国家自然科学基金青年基金、省教育厅优秀青年项目、科研启动基金等，发表论文30余篇，其中以第一作者/通讯作者发表SCI检索论文近20篇（中科院TOP期刊论文8篇），EI检索论文4篇。担任国家自然科学基金通讯评审专家、省自然科学基金通讯评审专家，担任Materials等SCI期刊Guest Editor，担任Materials and Design、Science China Technological Sciences、Engineering Computations等多个国际期刊审稿人。

研究方向

DEM/FEM耦合研究、脆性材料断裂、MPS/FEM耦合研究、散体材料、汽车被动安全、新能源汽车、人工智能与辅助驾驶

学习、工作经历

2017.10 –至今广东工业大学，车辆工程，副教授、硕士研究生导师

2019.09 - 2020.09东京大学，工学院，访问学者，合作教授Koshizuka Seiichi

2013.07 - 2017.10湘潭大学，机械工程，讲师、副教授、硕士研究生导师

2008.09 - 2013.06华南理工大学，车辆工程，博士学位（硕博连读）

科研项目

[1]国家自然科学基金面上项目，“基于复杂形状离散元/有限元的砂卵地层盾构仿真方法与实验研究”(51878184) 2019-2022，主持.

[2]国家自然科学基金青年基金项目，“基于离散元/有限元耦合的高压辊磨粉碎仿真方法与实验研究”(51404209) 2015-2017，主持.

[3]湖南省教育厅优秀青年项目, “基于DEM/FEM的汽车夹层玻璃冲击破坏特性研究”(16B259),2016-2019,主持.

[4]湘潭大学科研启动基金,“基于DEM/FEM的高压辊磨粉碎仿真方法研究”（14QDZ09）2014-2016，主持.

[5]广东工业大学青年教师种子基金,“基于DEM/FEM的砂卵石地层盾构刀具失效机理仿真方法基础研究”, 2017-2019,主持.

[6]国家自然科学基金青年基金,“不确定条件下脆性材料离散元模型参量的计算反求方法研究”(11602212),2017-2019,参与,第2.

[7]国家自然科学基金青年基金, “考虑砂轮表面形貌及工件缺陷影响的工程陶瓷磨削加工损伤行为研究”. (51605409),2017-2019,参与,第2.

[8]国家自然科学基金面上项目,“基于DEM/FEM的人车碰撞事故前挡玻璃破坏特性及头部损伤评价研究”（11172104）2012.01-2015.12，参与,第2.

[9]科技部国际合作项目，“汽车风挡夹层玻璃冲击破坏特性的仿真方法和实验研究”，2008-2011,参与.

[10]企业项目，新拌混凝土流变学及混凝土机械优化设计, 2013.9-2015.10,参与.

[11]企业项目，智能医疗护理设备研发项目, 2016.3-2016.10,参与.

[12]“汽车被动安全及行人保护研究”，自拟课题.

部分学术成果

[1]Gao Wei*, Wang Jiaweng, He Xiaoqing, Feng YT*, Wang Chengyong. Modeling the mechanical behavior of a helmeted headform impacted with a laminated windshield with consideration of composite failure. Composite Structures, 2021: 114787. (SCI/EI,中科院TOP期刊)

[2]Gao Wei*, Liu Xin, Hu Jie, Feng YT*. A Novel Bilinear Constitutive Law for Cohesive Elements to Model the Fracture of Pressure-Dependent Rocks. Rock Mechanics and Rock Engineering, 2021: 1-20. (SCI/EI)

[3]Feng YT*,Gao Wei*. On the strain energy distribution of two elastic solids under smooth contact[J]. Powder Technology, 2021, 389: 376-382. (SCI/EI)

[4]Gao Wei*, Takuya Matsunaga, Guangtao Duan, Seiichi Koshizuka, A coupled 3D isogeometric/least-square MPS approach for modeling fluid-structure interactions, Computer Methods in Applied Mechanics and Engineering, 2021: 113538. (SCI/EI,中科院TOP期刊)

[5]Wang Jiawen, Wang Runhao,Gao Wei*, Chen Shunhua*，Wang Chengyong. Numerical investigation of impact injury of a human head during contact interaction with a windshield glazing considering mechanical failure. International Journal of Impact Engineering, 2020: 103577. (SCI/EI,学生第一作者、第二作者,中科院TOP期刊)

[6]Gao Wei, Liu Xin, Chen Shunhua*, Bui Tinh Quo, Yoshimura Shinobu. A cohesive zone based DE/FE coupling approach for interfacial debonding analysis of laminated glass. Theoretical and Applied Fracture Mechanics, 2020: 102668. (SCI/EI)

[7]Gao Wei*, Feng Y.T*. A coupled 3D discrete elements/isogeometric method for particle/structure interaction problems, Computational Particle Mechanics, 2020,7: 869–880. (SCI/EI)

[8]Gao Wei*, Wang Jiawen, Shuohui Yin*, Feng Y.T. A coupled 3D isogeometric and discrete element approach for modelling interactions between structures and granular matters, Computer Methods in Applied Mechanics and Engineering, 2019, 354: 441-463. (SCI/EI,中科院TOP期刊)

[9]Gao Wei, Runhao Wang, Shunhua Chen*, Mengyan Zang. An intrinsic cohesive zone approach for impact failure of windshield laminated glass subjected to a pedestrian headform, International Journal of Impact Engineering, 2019, 126:147-159. (SCI/EI,中科院TOP期刊)

[10]Gao Wei*, Lei Liu, Zechu Liao, Shunhua Chen*, Mengyan Zang, Yuanqiang Tan. Discrete element analysis of the particle mixing performance in a ribbon mixer with a double U-shaped vessel, Granular Matter, 2019, Granular Matter, 2019, 21(1):12. (SCI/EI)

[11]Gao Wei*, Xiang Jibang, Chen Shunhua, Shuohui Yin, Mengyan Zang, Xuejun Zheng*.Intrinsic cohesive modeling of impact fracture behavior of laminated glass,Materials & Design, 2017, 127:321-335. (SCI/EI,中科院TOP期刊)

[12]Chen Shunhua, Mitsume Naoto, Bui Tinh Quoc,Gao Wei*,Yamada Tomonori, Zang Mengyan, Yoshimura Shinobu. Development of two intrinsic cohesive zone models for progressive interfacial cracking of laminated composites with matching and non-matching cohesive elements. Composite Structures, 2019, 229(1):111406. (SCI/EI,中科院TOP期刊)

[13]Chen Shunhua*, Chen Hu, Mitsume Naoto, Morita Naoki, Bui Tinh Quo,Gao Wei*, ShinobuYoshimura, A nodal-based Lagrange multiplier/cohesive zone approach for dynamic interfacial cracking analysis of thin-walled laminated composite structures, Composite Structures, 2021, 256(15): 113112 (SCI/EI,中科院TOP期刊)

[14]Chen Hu, Zhang YX*, Zhu Linpei, Xiong Fei, Liu Jing,Gao Wei*, A Particle-Based Cohesive Crack Model for Brittle Fracture Problems, Materials 2020, 13(16), 3573. (SCI/EI)

[15]Chen Shunhua*, Mitsume Naoto,Gao Wei*, Yamada Tomonori, Zang Mengyan, Yoshimura Shinobu. A nodal-based extrinsic cohesive/contact model for interfacial debonding analyses in composite structures [J], Computers & Structures, 2019, 215(15):80-97. (SCI/EI)

[16]Gao Wei*, Tan Yuanqiang, Jiang Shengqiang, Zhang Gaofeng, Zang Mengyan.A virtual-surface contact algorithm for the interaction between FE and spherical DE. Finite Elements in Analysis and Design, 2016, 108:32-40. (SCI/EI)

[17]Zang Mengyan,Gao Wei, Lei Zhou. A contact algorithm for 3D discrete and finite element contact problems based on penalty function method.Computational Mechanics, 2011, 48(5):541-550. (SCI/EI)

[18]Gao Wei, Zang Mengyan.Thesimulation of laminated glass beam impact problem by developing fracture model of spherical DEM.Engineering Analysis with Boundary Elements, 2014, 42:2-7. (SCI/EI)

[19]Gao Wei, Zang Mengyan*, Xu Wei.An approach to freely combining 3D discrete and finite element methods. International Journal of Computational Methods, 2014, 11(1):1350051. (SCI/EI)

[20]Gao Wei, Tan Yuanqiang, Zang Mengyan*.A Cubic Arranged Spherical Discrete Element Model. International Journal of Computational Methods, 2014, 11(5): 1350102. (SCI/EI)

[21]Xu Wei, Zang Mengyan*,Gao Wei.Adaptive Combined DE/FE Algorithm for Brittle Fracture of Plane Stress Problems, Computational Mechanics, 2014, 54(2):535-546. (SCI/EI)

[22]高伟,臧孟炎*.基于内聚力模型的夹层玻璃梁冲击破坏过程仿真.华南理工大学学报(自然科学版), 2013,41(5):139-144. (EI)

[23]谭援强,肖湘武,郑军辉,姜胜强,高伟.锥形改流体下部孔径对筒仓卸料流态的影响,农业工程学报, 2016, 32(19):82-87. (EI)

[24]Tan Yuanqiang, Zheng Junhui,Gao Wei, Feng YT.The Effect of Powder Flowability in the Selective Laser Sintering Process. International Conference on Discrete Element Methods. Springer, Singapore, 2016: 629-636.(EI)

[25]高伟,刘磊,王润豪,向纪邦,廖泽楚,聂松辉,郑学军.一种可分离为抬式/推式担架的多功能轮椅,专利授权号:ZL201710095005.0.发明专利,国家知识产权局, 2018.

[26]臧孟炎,雷周,高伟,陈虎，余洁冰.显式离散元与有限元耦合软件V1.0.计算机软件著作权.登记号：2011SR057163.国家版权局, 2011.

[27]臧孟炎,徐伟,雷周,高伟,余洁冰.一种快速获取脆性材料冲击破坏特性的方法,专利授权号: ZL201110041916.8.发明专利,国家知识产权局, 2013.

[28]廖泽楚,高伟*,刘磊,姜胜强,谭援强.螺带式混凝土搅拌机混合特性及DEM模拟,过程工程学报, 2019, 19(4):668-675. (CSCD核心,学生第一作者)

[29]刘磊,高伟*,廖泽楚,张乐,张高峰.基于离散元法的高压辊磨破碎仿真研究[J].湘潭大学自然科学学报, 2017, 39(2): 76-80. (学生第一作者)

[30]Gao Wei, Zang Mengyan. A fracture model for 3D spherical discrete Element method. The 4th International Conference on Computational Methods (ICCM2012), 2012, Gold Coast, Australia.

[31]Zang Mengyan,Gao Wei, Lei Zou. A DEM-FEM contact algorithm. The 3rd International Conference on Computational Methods (ICCM 2010), 2010, Zhangjiajie, China.

通信地址

办公地点：广东工业大学实验1号楼

通信地址：广州大学城外环西路100号

邮政编码：510006

Email: gaowei@gdut.edu.cn

所指导研究生获国家奖学金、一等奖学金及其它项目资助计划，欢迎对结构设计与CAE分析、新能源汽车、人工智能与辅助驾驶、脆性材料断裂等有浓厚研究兴趣的各专业同学报考！