2004.5-2004.9 英国利物浦大学 工程学院 访问学者； .
Jiang, Shuzhen; Guo, Zhongning, et.al ,A Rapid One-Step Process for Fabrication of Biomimetic Superhydrophobic Surfaces by Pulse Electrodeposition. Materials (Basel, Switzerland),10(11)2017
T. N. Chen, Z. N. Guo, B. W. Zeng, S. H. Yin, Y. Deng, H. H. Li,Experimental Research and Numerical Simulation of the Punch Forming of Aluminum Foil based on a Laser-induced Cavitation Bubble. Int J Adv Manuf Technol,(6) 2017
Deng, Y; Renaud, P; Guo, ZN ; Huang, ZG ; Chen, Y .Single cell isolation process with laser induced forward transfer.Journal of Biological Engineering. 11(7)2017
Wei, H.,Guo,Z,et.al.Formation of porous hydrophobic stainless steel surfaces by maskless electrochemical machining. Surface Engineering.2016
Chen, Y. J.Yue, T. M.Guo, Z. N.A new laser joining technology for direct-bonding of metals and plastics.Materials & Design.2016
R. Chen, Z.N.Guo, J.W.Liu, T.M.Yue, S.W.Chen. A numerical model and computer simulation for machining particle reinforced metal matrix composites in electric discharge machining. Materials Research Innovations,（19）2015
H S Lian, Z N Guo, J W Liu, Z G Huang, J F He. Experimental study on electrophoretic-assisted micro ultrasonic machining. International Journal of Advanced Manufacturing Technology. 2014
Liu JW, Yue TM , Guo N. Grinding-aided electrochemical discharge machining of particulate reinforced metal matrix composites. International Journal of Advanced Manufacturing Technology, 68(9-12) 2013,
Xu, Zhenlong;Wu, Fugen;Guo, Zhongning. Shear-wave band gaps tuned in two-dimensional phononic crystals with magnetorheological material, Solid State Communications, v 154, n 1, January, 2013
Li QH, Yue TM, Guo ZN, Lin X. Microstructure and Corrosion Properties of AlCoCrFeNi High Entropy Alloy Coatings Deposited on AISI 1045 Steel by the Electrospark Process. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science. 44A(4)2013
Xu, Zhenlong; Wu, Fugen; Guo, Zhongning. Localized mode of a compression wave in two-dimensional sold phononic crystals. Modern Physics Letters B. Volume 26, Issue 29, 2012
Xu, Zhenlong, Wu, Fugen, Guo, Zhongning Low frequency phononic band structures in two-dimensional arc-shaped phononic crystals. Physics Letters A, 376(33), 2012
Mo, Binghua;Guo,Zhongning;Li, Yuanbo;Huang, Zhigang;Wang, Guan. Mechanism of resistance microwelding of insulated copper wire to phosphor bronze sheet, Materials Transactions, v 52, n 6, June, 2011
Liu, J. W.; Yue, T. M.; Guo, Z. NAn analysis of the discharge mechanism in electrochemical discharge machining of particulate reinforced metal matrix composites. International Journal of Machine Tool & Manufacture. V: 50(1): 86-96, 2010
Z.G. Huang, T. M. Yue, K. C. Chan, Z. N. Guo, Flexible dissipative particle dynamics, International Journal of Modern Physics C 21 (9) 2010
Z. G. Huang, Z. N. Guo, T. M. Yue, K. C. Chan, Non-periodic boundary model with soft transition in molecular dynamics simulation, Europhysics Letters 92 (5) 2010
Liu,J.W.,Yue,T.M.,Guo,Z.N. Wire Electrochemical Discharge Machining of Particle Reinforced Aluminum Alloy 6061 Materials and Manufacturing Processes, 24(4), 2009
Huang, Z.G.;Guo, Z.N.;Chen, X.;Yu, Z.Q.;Yu, T.M.;Lee, W.B.. Microscopic machining mechanism of polishing based on vibrations of liquid； Nanotechnology, v 18, n 10, 14 March ，2007
Zhang, F.L.;Wang, C.Y.;Guo, Z.N.;Chen, J.. Effect of electrical spark discharging parameters on the etching of chemical vapor deposition (CVD) diamond film ；Materials and Manufacturing Processes, v 22, n 7-18, 2007
Huang, Zhigang ,Guo, Zhongning, et al. Molecular dynamics simulation of polishing process based on coupling vibrations of liquid, Chinese Journal of Mechanical Engineering (English Edition) ,v 19, n 1, 2006.
Huang Z.G, Guo Z.N. Molecular dynamics simulation For ultra-fine machining, Materials and Manufacturing process, Vol., 21 No.4, 2006
Z.N. Guo, et al.. Computer simulation and characteristic analysis of electrode fluctuation in wire electric discharge machining, Journal of Materials Processing Technology, Vol.142, 2003
Z.N. Guo, et al.. Experimental investigation into shaping particle-reinforced material by WEDM-HS, Journal of Materials Processing Technology, Vol.129, 2002
Z.N. Guo, et al.. Investigation into polishing process of CVD diamond films, Materials and Manufacturing Processes, Vol.17 No.1, 2002
Z.N. Guo, et al.. The design of an ultrasonic polishing tool by the transfer-matrix method, Journal of Material Processing Technology, Vol.102, 2000
T.C. Lee, Z.N. Guo, et al.. Exploration of shaping Al2O3 conductive ceramic by ultrasonic-aided wire electrical discharge machining, Materials and Manufacturing Processes, Vol.12, No.6, 1997
Z.N. Guo, T.C. Lee, T.M. Yue, W.S. Lau. Study on the machining mechanism of WEDM with ultrasonic vibration of wire, Journal of Material Processing Technology, Vol.67,1997
Z.N. Guo, T.C. Lee, T.M. Yue, W.S. Lau. A study of ultrasonic aided wire electrical
