主要论文 |
[1]Anfu Chen*, Guofeng Qin, Hang Gu, Jing Li, Chaozong Liu, Hanxiong Huang, Caihong Lei, Zhengrong Zhang*. Magnetic-directed fillers migration during micro-injection molding of magnetic polypropylene nanocomposite surfaces with uplifted light trapping microarchitectures for freezing delay and photothermal-enhanced de-icing.Applied Thermal Engineering(TOP期刊,二区),2023, 230: 120810. [2]Anfu Chen*,Qiankun Wang, Mingke Li, Zhangyuan Peng, Jindi Lai, Jingjing Zhang, Jinbao Xu, Hanxiong Huang, Caihong Lei*.Combined approach of compression molding and magnetic attraction to micropatterning of magnetic polydimethylsiloxane composite surfaces with excellent anti-icing/deicing performance.ACS Applied Materials & Interfaces(TOP期刊,一区),2021, 13(40): 48153–48162. [3]Yameng Pei, Qingsong Xing,Anfu Chen*, Jinxing Xu, Yanmei Zhang, Hanxiong Huang, Caihong Lei. Enhanced solar photothermal anti-/de-icing performance of microstructured polypropylene/graphene composite surfaces with diameter- and density-optimized nanopillars.Chemical Engineering Science(TOP期刊,二区),2023, 282: 119330. [4]Yanmei Zhang, Qingsong Xing,Anfu Chen*,Mingke Li, Guofeng Qin, Jingjing Zhang, Caihong Lei. Turning hierarchically micro-/nanostructured polypropylene surfaces robustly superhydrophobic via tailoring contact line density of mushroom-shaped nanostructure.Chemical Engineering Science(TOP期刊,二区),2022, 262: 118027. [5]Jindi Lai,Anfu Chen*, Jing Li, Yameng Pei, Seyed Ataollah Naghavi, Caihong Lei, Chaozong Liu*, Lijia Huang*. Bio-inspired mechanically robust superhydrophobic polypropylene surfaces embedded with silicon carbide whiskers for enhancing bactericidal performance.Journal of Materials Research and Technology(一区),2023, 23: 998–1012. [6]Guofeng Qin,Anfu Chen*,Dejie Huang, Jindi Lai, Chuangkai Fang, Zhengrong Zhang, Jingjing Zhang, Caihong Lei.High Resistance to impalement of highly hydrophobic polycarbonate surfaces with nanosilica-coated rectangular pyramid arrays.Journal of Materials Science,2022, 57:2305–2317. [7]Qinsong Xing, Xulong Chen, Jiayu Tao,Anfu Chen*, et al. Ultrasonic assisted preparation of superhydrophobic polypropylene with flower-like micro-/nanostructure on surfaces.Acta Polymerica Sinica(高分子学报),2022, 53(6): 645–652. [8]Anfu Chen, Shuhua Deng, Jindi Lai, Jing Li; Weijia Chen, Swastina Nath Varma, Jingjing Zhang, Caihong Lei, Chaozong Liu*, Lijia Huang*. Hydrogels for Oral Tissue Engineering: Challenges and Opportunities.Molecules(二区),2023, 28(9): 3946. [9]Shuhua Deng,Anfu Chen*,Weijia Chen, Jindi Lai, Yameng Pei, Jiahua Wen, Can Yang, Jiajun Luo, Jingjing Zhang, Caihong Lei, Swastina Nath Varma, Chaozong Liu*. Fabrication of biodegradable and biocompatible functional polymers for anti-infection and augmenting wound repair.Polymers,2023, 15(1): 120. [10]Hang Gu, Guofeng Qin,Anfu Chen*,Mingke Li, Dejie Huang, Zhangyuan Peng, Jingjing Zhang, Caihong Lei. Directional migration and distribution of magnetic microparticles in polypropylene-matrix magnetic composites molded by an injection molding assisted by external magnetic field.Materials,2022, 15(13): 4632. [11]G Liu, S Wen, Y Wang, J Zhang*, S Huang,A Chen. Exfoliation and distribution behavior of graphene nanoplatelets in polystyrene-based foams fabricated by supercritical CO2assisted microcellular foaming.Chemical Engineering Science(TOP期刊,二区),2022, 249: 117331. [12]Yirong Chen, Jingjing Zhang, Lerong Wang, Qinru Tian, Jiajie Wu, Pengcheng Li,Anfu Chen, Shijun Huang, Caihong Lei. Tribological behavior of carbon-fiber-reinforced polymer with highly oriented graphite nanoplatelets.Tribology International(二区),2023, 186: 108577. [13]Anfu Chen*, Jindi Lai, Mingke Li, Chuangkai Fang, Guofeng Qin, Sha Ding, Jingjing Zhang, Zhengrong Zhang, Hanxiong Huang*.Long-lived T-shaped micropillars with submicron-villi on PP/POE surfaces with grinding-enhanced water repellency fabricated via hot compression molding.Journal of Physical Chemistry B,2021, 125(26): 7290–7298. [14]Qiankun Wang,Anfu Chen*, Hang Gu, Guofeng Qin, Jingjing Zhang, Jinbao Xu, Guo Jiang, Wei Liu, Zhengrong Zhang, Hanxiong Huang. Highly interconnected porous PDMS/CNTs sandwich sponges with anti-icing/deicing microstructured surfaces.Journal of Materials Science,2021, 56(20), 11723–11735. [15]Anfu Chen*, Sha Ding, Junhai Huang, Jingjing Zhang, Yong Dong, Xiaoling Fu, Binqing Shi, Bin Wang, Zhengrong Zhang*.Fabrication of superrepellent microstructured polypropylene/graphene surfaces with enhanced wear resistance.Journal of Materials Science,2019, 54(5): 3914–3926. [16]Anfu Chen, Hanxiong Huang*. Rapid fabrication of T-shaped micropillars on polypropylene surfaces with robust Cassie–Baxter state for quantitative droplet collection.Journal of Physical Chemistry C,2016, 120(3): 1556–1561. [17]Anfu Chen, Hanxiong Huang*, Weisheng Guan. Design of microstructures on superhydrophobic polymeric surfaces with tunable adhesion. Acta Polymerica Sinica(高分子学报), 2015, (3): 245-251 [18]Anfu Chen, Hanxiong Huang*. Effect of silica particles adhered to dual-level microstructure on wetting characteristics of PP surfaces replicated by microinjection compression molding. Acta Polymerica Sinica(高分子学报), 2016, (6): 791-796 [19]Anfu Chen, Hanxiong Huang*, Weisheng Guan. Comparison of superimposed effects in high-shear-rate capillary rheology of polystyrene, polypropylene, and linear low-density polyethylene melts.Polymer Engineering and Science,2015, 55(3): 506–512 [20]Ziwei Xu, Suihua He, Jingjing Zhang*, Shijun Huang,Anfu Chen, et al. Relationship between the structure and thermal properties of polypropylene/graphene nanoplatelets composites for different platelet-sizes.Composites Science and Technology(一区),2019, 183: 107826. [21]Suihua He, Jingjing Zhang*, Xiaoting, Xiao, Yongjian Lai,Anfu Chen, et al. Study on the morphology development and dispersion mechanism of polypropylene/graphene nanoplatelets composites for different shear field.Composites Science and Technology(一区),2017, 153: 209-221. [22]Jianming Chen, Jingjing Zhang*, Jingyi Deng, Shaohong Qiu, Jiahui Zheng, Yunan Chen, Weiqi Zhang, Shijun Huang,Anfu Chen,Caihong Lei*. Control of graphene nanoplatelets at the interface of the co-continuous polypropylene/polyamides 6 blend under the elongational flow.European Polymer Journal(二区), 2022, 161: 111703. [23]Ke Ru,Anfu Chen, Guo Jiang, Shuidong Zhang*. Facile strategy to improve thermal conductivity of anisotropic poly(butylene succinate) phosphorus-containing ionomer films via compression molding.Polymers for Advanced Technologies,2021, 33: 1194–1204. [24]Yang Chen, Wenhai Xiao, Jie Zhang, Ming Bu, Xiaoqing Zhang,Anfu Chen, Jinbao Xu*, Caihong Lei. Development of recoverable and recyclable Fe3O4-supported organocatalysts for ring-opening polymerization.Journal of Polymer Science,2020, 58(24): 3411-3418. [25]Weisheng Guan, Hanxiong Huang*,Anfu Chen. Tuning 3D topography on biomimetic surface for efficient self-cleaning and microfluidic manipulation.Journal of Micromechanics and Microengineering,2015, 25(3): 035001. [26]Heng Xie, Hanxiong Huang*,Anfu Chen. Design and application of flexible insert for microinjection compression molding polymer microlens arrays with tunable height.Polymer Engineering and Science,2018, 58(2): 213-219. [27] Liuxueying Zhong, Jiayi Jin, Danying Zheng*, Weisheng Guan, Yue Guo,Anfu Chen, et al. Influence of super-hydrophobic silicone rubber substrate on the growth and differentiation of human lens epithelial cells.Journal of Materials Science-Materials in Medicine,2018, 29(11): 176.
|